1. USED RC Model Vehicle Parts & Accessories Offers
  2. sku: 2493532121925653
  3. MAXX PRODUCTS 2701

MAXX PRODUCTS 2701 Mpi Rx Charge Harness Set Futaba Airplane 843516001280 Tx/rx R/c

2701 Maxx Products Lot Of 3 Mpi Tx/rx Charge Harness Set Futaba Rc R/c Airplane

( Brand: Maxx Products ), ( Manufacturer Part Number: 2701 ), ( Type: Tx/rx Charge Harness Set ), ( UPC: 843516001280 )

Review MAXX PRODUCTS Max Lot Of Mpi Tx/rx Charge Harness Set Futaba Rc R/c Airplane

The Maxx 2701 MPI TX/RX Charge Harness Set from Futaba is a high-performance, accessory kit designed specifically for use with Futaba 2.4GHz model airplanes equipped with Maxx 2701 MPI receivers. This harness set streamlines the charging process for your radio-controlled airplane model, making it easier and more convenient to keep your batteries charged for longer flying sessions.

The TX/RX Charge Harness Set includes all of the necessary components required to connect both the transmitter (TX) and receiver (RX) to the included Balance Charger, as well as charging the batteries in-flight using a BEC (Battery Eliminator Circuit) connected to the receiver. The set comes with a total of six color-coded wires - red for the transmitter, white for the receiver's outer wires, and black for the receiver's ground and BEC wires.

The Futaba Maxx 2701 MPI TX section of the harness features three wires:

- A green power wire with a JST-XH connector on the harness end and a JST-XH/JST-XHP compatible plug on the transmitter end.

- A ground wire with a JST-SH connector on the harness end and a twisted pair of wires with banana plugs on the transmitter end, meant for connecting to the transmitter's ground and rudder servo connections.

- A telemetry wire with a JST-XH connector on the harness end and a JST-XH/JST-XLP compatible plug on the transmitter end. This wire is used for Rx telemetry data transmission to the transmitter.

The Futaba Maxx 2701 MPI RX section consists of three wires:

- Two white wires with a JST-XH connector on the harness end and a pair of wires with pin connectors on the receiver end, used for Link and Auxiliary functions.

- A black ground wire with a JST-SH connector on the harness end and a JST-XH with a supplied cable, allowing for the connection of a BEC power wire for in-flight charging and added convenience.

The Maxx 2701 MPI TX/RX Charge Harness Set from Futaba offers a rugged and reliable connection system, providing Durability and peace of mind while charging and flying your radio-controlled airplane. All wires are shielded to minimize interference, allowing for stable and efficient power transfer and telemetry data transmission.

Compatibility:

- Futaba Maxx 2701 MPI receivers

- Futaba S3110SB, S3172SB, S3112SB, S3114SB, and S3115SB transmitters

* Balance Chargers that are compatible with the Futaba JST-XH and JST-XHP connectors.

Always refer to your specific airplane manual and the Futaba Maxx 2701 MPI receiver instruction manual for proper installation instructions and safety precautions.

The Maxx 2701 MPI TX/RX Charge Harness Set by Futaba is a device designed for freshly electrified RC airplane enthusiasts, allowing the seamless integration of a multifunction sensor unit (MFS-S1) with the S-FETS II series of radio transmitters and receivers. I will detail the primary advantages and drawbacks of using this charge harness set.

Advantages:

1. Compatibility: The harness is specifically designed to be used with Futaba's S-FETS II series radio equipment, ensuring a perfect fit and hassle-free installation.

2. Simplified Wiring: The harness consolidates various wiring requirements into a single set, reducing complex wiring loops and minimizing potential connection errors.

3. Improved Functionality: The MFS-S1 unit, which this harness is designed to connect, is capable of providing real-time information such as receiver battery voltage, aileron, elevator, rudder, throttle, and servo response data. This data can aid in improving the performance and efficiency of an RC airplane.

4. Enhanced Safety: The harness expedites setup, minimizing the chances of connection errors and increasing overall peace of mind. Furthermore, as the charge harness is pre-built, it reduces the risk of users coming into contact with multiple exposed wires during the installation process.

Disadvantages:

1. Limited Compatibility: The Maxx 2701 MPI TX/RX Charge Harness Set is only compatible with the S-FETS II series, restricting its versatility for RC enthusiasts using different radio systems.

2. Additional Cost: The harness significantly increases the overall cost of using a Futaba S-FETS II system, especially for those who are already invested in an extensive RC airplane setup.

3. Complex Configuration: While simplifying the installation process in some aspects, the harness comes with an intricate MFS-S1 configuration process, which requires users to navigate through its various menus to properly adjust the settings for their intended use.

In conclusion, the Maxx 2701 MPI TX/RX Charge Harness Set offers several advantages, including streamlined installation, enhanced functionality, and safety through simplified wiring. However, these advantages come with a compromise a limited compatibility range, additional cost, and complex setup process. If you currently utilize or plan on using Futaba's S-FETS II series, this harness is an excellent investment. On the other hand, for those who do not, the potential cost and complexity may not outweigh the benefits. If you're developing your RC airplane setup, it's crucial to thoroughly evaluate your specific use case before making the decision to purchase the Futaba Maxx 2701 MPI TX/RX Charge Harness Set. Ultimately, this accessory can provide convenience and valuable data, assuming the aforementioned factors align with your needs.

Recommendation:

I would recommend the Maxx 2701 MPI TX/RX Charge Harness Set to those who are utilizing or plan on using Futaba's S-FETS II system for their RC airplane setup. By investing in this harness, users can streamline the installation process, access valuable data, and consolidate their wiring, thereby reducing errors and enhancing their overall experience.

However, I would advise those not using the S-FETS II system to explore other charging harnesses that may align better with their radio alternatives and budget. Additionally, carefully consider the potential setup and configuration complexities before integrating the harness into your RC airplane project.

Details:

GSR veers 1709 GS 9.9.1b3 1709 This is in New/Excellent condition. See photos of actual item. What You See Is Get.

part #: 2701 prices

  • $5.00-$38.00

specifications rcparta:

  • brand: Maxx Products
  • mpn: 2701
  • type: Tx/rx Charge Harness Set
  • upc: 843516001280

general rcparta:

  • Radio Control Control Line > RC model Vehicle Parts Accs > Other RC Parts Accs
  • condition: New

returns rcparta:

  • time: 30 Days
  • method: Money back
  • paid by: Seller
  • policy: Returns Accepted

payments rcparta:

  • other
  • credit card: Discover
  • wallet: Google-pay

seller rcparta:

  • city: Cape Canaveral, Florida
  • rating: 100.0%
  • # reviews: 28748

offer rcparta:

  • options: Ship-to-home
  • started: February 2, 2025
  • quantity: 1
  • availability: In Stock
  • sold: 0

shipping rcparta:

  • type: Fixed
  • cost: $0.00
  • class: Expedited
  • service: Expedited
  • transit: 4-8 Days
type: tx/rx charge harness set,
category: toys & hobbies > radio control line > rc model vehicle parts accs > rc parts accs, sku: 2493532121925653,

Maxx Products 2701 Is Similar To:

rcparta logo
5 offers $5.00–$38.00 USD
  • Offer #1: $5.00 price + $5.48 shipping estimate = $10.48* total. One package. Charge plugs for transmitter and receiver.+$5.48 shipping
  • Offer #2: $38.00 price + $3.56 shipping estimate = $41.56* total. DURATRAX SKID PLATE. You are looking at a" DURATRAX DTXC SKID PLATE CENTER SILVER ALUMINUM E/T MAXX NEW.".+$3.56 shipping
  • Offer #3: $28.01 price + $0.00 shipping estimate = $28.01* total. Use genuine OEM parts for safety reliability and performance. Maxx Cold XTUC27.01 Braked Caster.FREE SHIPPING
  • Offer #4: $6.99 price + $5.48 shipping estimate = $12.47* total.+$5.48 shipping
  • Offer #5: $39.99 price + $0.00 shipping estimate = $39.99* total. Duratrax Aluminum Center Skid Plate for Traxxas E-Maxx/T-Maxx - Silver DTXC Brand: DuratraxPart #: DTXC Item: Skid PlateMount Location: CenterMaterial: AluminumColor: SilverIncludes: Mounting HardwareFor: Traxxas E-Maxx / T-MaxxScale: 1:10.FREE SHIPPING

Copyright © rcparta.com